feat: 更改切换 SIM卡前端位置

README.md

@@ -0,0 +1,353 @@
+# SMS Forwarding
+
+一个运行在 Node.js 上的 4G 短信网关。程序通过串口控制 4G 模组，接收 PDU 短信，合并长短信，并把短信转发到邮件、钉钉、飞书、Telegram、PushPlus、Server 酱、Bark 或自定义 Webhook。
+
+项目同时提供 Web 管理台和 HTTP API，可用于查看模组状态、收件箱、日志、推送通道，发送短信，切换发送短信使用的 SIM，以及执行 AT 命令。
+
+## 功能
+
+- 通过 AT 指令和 4G 模组通信
+- 自动探测可用 AT 串口
+- PDU 模式接收短信
+- 长短信自动合并
+- 收件箱持久化到本地文件
+- 多推送通道转发短信
+- Web 管理台
+- Token 鉴权的 HTTP API
+- Web/API 发送短信
+- 双 SIM 状态识别和发送前切卡
+- 移动数据开关和启动断网保护
+- AT 命令调试入口
+
+## 环境要求
+
+- Node.js 18 或更高版本
+- 可通过串口访问的 4G 模组
+- 已插入可收发短信的 SIM 卡
+- Linux 下通常需要访问 `/dev/ttyUSB*` 的权限
+
+已主要围绕 ML307A 调试。其他 AT 指令兼容模组可以运行，但双卡、移动数据、URC 卡槽识别等能力取决于模组返回的指令结果。
+
+## 快速启动
+
+```bash
+npm install
+cp config.example.json config.json
+```
+
+编辑 `config.json`，至少确认：
+
+```json
+{
+  "serial": {
+    "path": "/dev/ttyUSB0",
+    "baudRate": 115200,
+    "autoDetect": true
+  },
+  "api": {
+    "port": 3000,
+    "webToken": "change-this-token"
+  }
+}
+```
+
+启动：
+
+```bash
+npm start
+```
+
+访问管理台：
+
+```text
+http://localhost:3000/admin
+```
+
+第一次访问会要求输入 `api.webToken`。也可以临时通过 URL 传入：
+
+```text
+http://localhost:3000/admin?token=change-this-token
+```
+
+## Docker 运行
+
+先准备配置：
+
+```bash
+cp config.example.json config.json
+```
+
+然后启动：
+
+```bash
+docker compose up --build -d
+```
+
+查看日志：
+
+```bash
+docker compose logs -f sms-gateway
+```
+
+`docker-compose.yml` 会挂载：
+
+- `./config.json:/app/config.json`
+- `./logs:/app/logs`
+- `./data:/app/data`
+- `/dev:/dev`
+- `/sys:/sys:ro`
+
+默认端口是 `3000`。如需修改宿主机端口：
+
+```bash
+SMS_GATEWAY_PORT=8080 docker compose up -d
+```
+
+## PM2 运行
+
+```bash
+npm install
+cp config.example.json config.json
+pm2 start ecosystem.config.js
+pm2 save
+```
+
+## 配置
+
+`config.json` 必须存在，否则程序会退出。完整模板见 `config.example.json`。
+
+### 必填项
+
+| 配置项 | 说明 |
+| --- | --- |
+| `serial.path` | 串口路径。Linux 常见为 `/dev/ttyUSB0`，Windows 可写 `COM3`。`serial.autoDetect=true` 时它是优先探测项；`false` 时它就是实际打开的串口。 |
+| `serial.baudRate` | 串口波特率，通常是 `115200`。 |
+| `api.port` | Web 管理台和 HTTP API 监听端口。 |
+| `api.webToken` | 唯一访问凭据。项目没有默认账号密码，也没有 `admin/admin123` Basic Auth。 |
+
+### 可选项
+
+| 配置项 | 默认值 | 说明 |
+| --- | --- | --- |
+| `serial.autoDetect` | `true` | 是否自动探测可响应 `AT` 的串口。 |
+| `serial.probeTimeout` | `1200` | 单个串口探测超时，单位毫秒。 |
+| `mobileData.cid` | `1` | 移动数据 PDP CID。有效范围 `1-15`，不要使用 `8`。 |
+| `simCards` | `[]` | 只影响 Web 显示的 SIM 手机号或标签，不影响实际收发。`slot=0` 是 SIM1，`slot=1` 是 SIM2。 |
+| `smtp` | 未启用 | 配置后会额外发送邮件通知。填写 `smtp.server` 后需要同时正确填写 `port`、`user`、`pass`、`sendTo`。 |
+| `inbox.maxReceivedMessages` | `200` | 收件箱最多保留条数，代码上限是 `5000`。 |
+| `inbox.receivedMessagesFile` | `data/received-messages.json` | 收件箱持久化文件。相对路径按项目根目录解析。 |
+| `inbox.partitionBySim` | `true` | 查询收件箱时是否按 SIM 信息隔离。 |
+| `inbox.allowAllSimMessages` | `false` | 是否允许显式查询全部 SIM 历史。 |
+| `inbox.dualSimDefaultScope` | `all` | 双卡场景下默认收件箱范围，可选 `all` 或 `current`。 |
+| `pushChannels` | `[]` | 推送通道列表。通道 `enabled=true` 时必须填写该类型要求的目标字段。 |
+
+`api.webToken` 支持以下传入方式：
+
+- `Authorization: Bearer <token>`
+- `X-Web-Token: <token>`
+- `?token=<token>`
+- Web 管理台登录页
+
+## 推送通道
+
+支持的 `pushChannels[].type`：
+
+| 类型 | 必填字段 |
+| --- | --- |
+| `dingtalk` | `url`，`secret` 可选 |
+| `feishu` | `url`，`secret` 可选 |
+| `telegram` | `url` 填 Bot Token，`key1` 填 Chat ID |
+| `pushplus` | `key1` 填 PushPlus Token |
+| `serverchan` | `key1` 填 Server 酱 SendKey |
+| `bark` | `url` |
+| `post_json` | `url` |
+| `get` | `url` |
+| `custom` | `url`，`customBody` 可选 |
+
+`customBody` 必须是合法 JSON 字符串，支持以下占位符：
+
+- `{sender}`
+- `{message}`
+- `{timestamp}`
+
+`enabled=false` 的通道可以保留空字段；`enabled=true` 时会校验目标字段。
+
+## SIM 行为
+
+启动初始化时程序会探测 SIM 状态。运行期间的普通状态刷新不会为了探测卡槽而持续切换 SIM。
+
+发送短信时使用当前绑定的发送 SIM。Web 管理台的切卡入口放在“发送短信”区域，切换会同时设置模组的 `SWITCHSIM` 和 `BINDSIM`，然后恢复短信直出配置。
+
+短信接收使用 `CNMI` 直出模式。收到短信时，如果模组 URC 携带卡槽信息，会记录为 SIM1 或 SIM2；如果 URC 没有卡槽信息，收件箱会显示为未知 SIM。
+
+如果只想给管理台显示手机号，可配置：
+
+```json
+{
+  "simCards": [
+    { "slot": 0, "phoneNumber": "+8613800138000" },
+    { "slot": 1, "phoneNumber": "+447700900000" }
+  ]
+}
+```
+
+## HTTP API
+
+所有 `/api/*` 接口都需要 token。下面示例使用 `X-Web-Token`：
+
+```bash
+TOKEN=change-this-token
+BASE=http://localhost:3000
+```
+
+### 状态和日志
+
+```bash
+curl -H "X-Web-Token: $TOKEN" "$BASE/api/status"
+curl -H "X-Web-Token: $TOKEN" "$BASE/api/modem/info"
+curl -H "X-Web-Token: $TOKEN" "$BASE/api/modem/signal"
+curl -H "X-Web-Token: $TOKEN" "$BASE/api/logs"
+```
+
+### 收件箱
+
+```bash
+curl -H "X-Web-Token: $TOKEN" "$BASE/api/sms/received?limit=50"
+curl -H "X-Web-Token: $TOKEN" "$BASE/api/sms/received?limit=50&scope=current"
+curl -H "X-Web-Token: $TOKEN" "$BASE/api/sms/received?limit=50&simSlot=0"
+curl -H "X-Web-Token: $TOKEN" "$BASE/api/sms/received?limit=50&simSlot=1"
+```
+
+### 发送短信
+
+```bash
+curl -X POST "$BASE/api/sms/send" \
+  -H "Content-Type: application/json" \
+  -H "X-Web-Token: $TOKEN" \
+  -d '{"phone":"13800138000","message":"测试短信"}'
+```
+
+### SIM 状态和切换
+
+```bash
+curl -H "X-Web-Token: $TOKEN" "$BASE/api/modem/sim"
+
+curl -X POST "$BASE/api/modem/sim/switch" \
+  -H "Content-Type: application/json" \
+  -H "X-Web-Token: $TOKEN" \
+  -d '{"slot":1}'
+```
+
+`slot=0` 表示 SIM1，`slot=1` 表示 SIM2。
+
+### 移动数据
+
+```bash
+curl -H "X-Web-Token: $TOKEN" "$BASE/api/modem/mobile-data"
+
+curl -X POST "$BASE/api/modem/mobile-data" \
+  -H "Content-Type: application/json" \
+  -H "X-Web-Token: $TOKEN" \
+  -d '{"enabled":false}'
+
+curl -X POST "$BASE/api/modem/mobile-data/consume" \
+  -H "Content-Type: application/json" \
+  -H "X-Web-Token: $TOKEN" \
+  -d '{"target":"8.8.8.8"}'
+```
+
+### AT 命令
+
+```bash
+curl -X POST "$BASE/api/modem/at" \
+  -H "Content-Type: application/json" \
+  -H "X-Web-Token: $TOKEN" \
+  -d '{"command":"AT+CSQ"}'
+```
+
+### 推送通道管理
+
+```bash
+curl -H "X-Web-Token: $TOKEN" "$BASE/api/push/channels"
+
+curl -X PUT "$BASE/api/push/channels" \
+  -H "Content-Type: application/json" \
+  -H "X-Web-Token: $TOKEN" \
+  -d '{"channels":[]}'
+
+curl -X POST "$BASE/api/push/test" \
+  -H "Content-Type: application/json" \
+  -H "X-Web-Token: $TOKEN" \
+  -d '{"enabled":true,"type":"post_json","name":"测试","url":"https://example.com/webhook"}'
+```
+
+## 目录结构
+
+```text
+.
+├── src/
+│   ├── index.js      # 程序入口
+│   ├── modem.js      # 串口、AT 指令、SIM 和移动数据控制
+│   ├── sms.js        # PDU 解析、长短信处理后的转发、收件箱记录
+│   ├── concat.js     # 长短信分段合并
+│   ├── push.js       # 推送通道
+│   ├── api.js        # Web 管理台和 HTTP API
+│   └── logger.js     # 日志
+├── public/           # Web 管理台静态文件
+├── data/             # 收件箱持久化数据
+├── logs/             # 运行日志
+├── config.example.json
+├── config.json       # 本地配置，不应提交
+├── docker-compose.yml
+├── Dockerfile
+└── ecosystem.config.js
+```
+
+## 常见问题
+
+### 串口打不开
+
+Linux 下先确认设备存在：
+
+```bash
+ls -l /dev/ttyUSB*
+```
+
+如果是权限问题，把运行用户加入串口权限组，重新登录后生效：
+
+```bash
+sudo usermod -a -G dialout "$USER"
+```
+
+Docker 场景下确认 `docker-compose.yml` 已挂载 `/dev`，并保留了 `device_cgroup_rules`。
+
+### 自动探测不到模组
+
+- 确认 USB 连接和供电。
+- 确认 `serial.baudRate` 正确。
+- 临时关闭自动探测，把 `serial.autoDetect` 设为 `false`，并把 `serial.path` 写成真实 AT 串口。
+- 查看日志中每个候选串口的探测结果。
+
+### 收不到短信
+
+- 确认 SIM 卡已插好且可以注册网络。
+- 查看 `/api/status` 里的 `ready`、`operator`、`signal`。
+- 确认日志里有 `PDU模式设置完成` 和 `CNMI参数设置完成`。
+- 部分模组不会在 URC 里带卡槽信息，这只影响收件箱显示的 SIM 归属，不代表短信没有收到。
+
+### 发送短信失败
+
+- 先在管理台确认当前发送 SIM。
+- 确认目标号码格式正确。
+- 查看日志里的 AT 响应。
+- 如果刚切换 SIM，等待模组重新注册网络后再发。
+
+## 安全说明
+
+- 不要提交 `config.json`、token、手机号、Webhook URL、SMTP 密码和日志。
+- 管理台和 API 只使用 `api.webToken` 鉴权。
+- `POST /api/modem/at` 可以执行任意 AT 命令，只应暴露在可信网络内。
+
+## License
+
+MIT

config.example.json

@@ -4,19 +4,40 @@
     "baudRate": 115200,
     "autoDetect": true,
     "probeTimeout": 1200,
-    "_comment": "Windows使用COM1/COM2/COM3等，也可以直接写数字如3; Linux使用/dev/ttyUSB0"
+    "_comment": "必填。path是手动串口或自动探测优先项；autoDetect=false时必须写真实串口。Windows使用COM1/COM2/COM3等，也可以直接写数字如3；Linux使用/dev/ttyUSB0。baudRate通常为115200，probeTimeout为AT探测超时毫秒。"
   },
   "mobileData": {
     "cid": 1,
-    "_comment": "每次启动都会强制关闭移动数据，管理台开关只影响当前运行期; ML307 cid8为IMS专用，请勿使用"
+    "_comment": "可选，默认cid=1。有效范围1-15，cid8为IMS专用，请勿使用。ML307每次启动都会强制断开MIPCALL应用层拨号，并保护性尝试CGACT；管理台开关只影响当前运行期。"
   },
+  "_simCards_comment": "可选。用于给SIM1/SIM2显示手机号；slot=0是SIM1，slot=1是SIM2。也兼容旧字段名simSlots、sims、sim。",
+  "simCards": [
+    {
+      "slot": 0,
+      "phoneNumber": "+8613800138000"
+    },
+    {
+      "slot": 1,
+      "phoneNumber": "+447700900000"
+    }
+  ],
   "smtp": {
+    "_comment": "可选。填写server后会启用邮件通知；启用时server、port、user、pass、sendTo都需要正确填写。不需要邮件可删除smtp或清空server。",
     "server": "smtp.qq.com",
     "port": 465,
     "user": "your@qq.com",
     "pass": "your_auth_code",
     "sendTo": "recipient@example.com"
   },
+  "inbox": {
+    "maxReceivedMessages": 200,
+    "receivedMessagesFile": "data/received-messages.json",
+    "partitionBySim": true,
+    "allowAllSimMessages": false,
+    "dualSimDefaultScope": "all",
+    "_comment": "全部可选。maxReceivedMessages默认200且最大5000；receivedMessagesFile默认data/received-messages.json；partitionBySim默认true；allowAllSimMessages默认false；dualSimDefaultScope可为all或current。默认显示全部短信；直出URC未携带卡槽时，新短信不区分SIM1/SIM2收件归属。"
+  },
+  "_pushChannels_comment": "可选。enabled=false时目标字段可以为空；enabled=true时按type要求填写目标：post_json/bark/get/dingtalk/custom/feishu需要url，telegram需要url(bot token)+key1(chat id)，pushplus需要key1(token)，serverchan需要key1(sendkey)。customBody如果填写必须是合法JSON字符串。",
   "pushChannels": [
     {
       "enabled": true,
@@ -72,9 +93,6 @@
   "api": {
     "port": 3000,
     "webToken": "change-this-token",
-    "auth": {
+    "_comment": "必填。port是API和管理台监听端口；webToken是唯一鉴权凭据，可通过Authorization: Bearer、X-Web-Token、token查询参数或管理台登录页提交。"
-      "username": "admin",
-      "password": "admin123"
-    }
   }
 }

public/admin.html

@@ -144,7 +144,6 @@
                 <span class="sim-slot__state" id="simSlot0State">--</span>
               </div>
               <span class="sim-slot__phone" id="simSlot0Phone">--</span>
-              <button class="button button--secondary button--compact" type="button" data-sim-switch="0">切到SIM1</button>
             </article>
 
             <article class="sim-slot" id="simSlot1">
@@ -153,7 +152,6 @@
                 <span class="sim-slot__state" id="simSlot1State">--</span>
               </div>
               <span class="sim-slot__phone" id="simSlot1Phone">--</span>
-              <button class="button button--secondary button--compact" type="button" data-sim-switch="1">切到SIM2</button>
             </article>
           </div>
         </div>
@@ -227,6 +225,10 @@
             <span>当前发送SIM</span>
             <strong id="sendSimLabel">--</strong>
           </p>
+          <div class="send-sim-picker" aria-label="选择发送SIM">
+            <button class="button button--secondary button--compact" type="button" data-sim-switch="0">SIM1</button>
+            <button class="button button--secondary button--compact" type="button" data-sim-switch="1">SIM2</button>
+          </div>
           <form id="smsForm" class="stack-form">
             <label class="field">
               <span class="field__label">目标号码</span>
@@ -419,4 +421,4 @@
   <script src="/assets/admin.js" type="module"></script>
 </body>
 
-</html>
+</html>

public/assets/admin.css

@@ -70,6 +70,10 @@
   box-sizing: border-box;
 }
 
+[hidden] {
+  display: none !important;
+}
+
 html {
   scroll-behavior: smooth;
   scroll-padding-top: 80px;
@@ -726,9 +730,13 @@ h3 {
   gap: var(--space-md);
 }
 
+.sim-slot-grid.is-single {
+  grid-template-columns: minmax(0, 1fr);
+}
+
 .sim-slot {
   display: grid;
-  grid-template-columns: minmax(0, 1fr) auto;
+  grid-template-columns: minmax(0, 1fr);
   align-items: center;
   gap: 8px 12px;
   border: 1px solid var(--hairline);
@@ -737,9 +745,14 @@ h3 {
   padding: 12px 14px;
 }
 
+.sim-slot.is-single {
+  grid-template-columns: minmax(0, 1fr);
+  min-height: 76px;
+}
+
 .sim-slot.is-active {
-  border-color: rgba(93, 184, 114, 0.55);
+  border-color: var(--surface-cream-strong);
-  box-shadow: inset 3px 0 0 var(--success);
+  background: var(--surface-soft);
 }
 
 .sim-slot__topline {
@@ -769,8 +782,8 @@ h3 {
 }
 
 .sim-slot.is-active .sim-slot__state {
-  background: rgba(93, 184, 114, 0.16);
+  background: var(--surface-cream-strong);
-  color: #2f7c44;
+  color: var(--body-strong);
 }
 
 .sim-slot__phone {
@@ -966,7 +979,7 @@ h3 {
   display: inline-flex;
   align-items: center;
   gap: 8px;
-  margin: -4px 0 var(--space-md);
+  margin: -4px 0 8px;
   padding: 0;
 }
 
@@ -984,6 +997,17 @@ h3 {
   overflow-wrap: anywhere;
 }
 
+.send-sim-picker {
+  display: flex;
+  flex-wrap: wrap;
+  gap: 8px;
+  margin: 0 0 var(--space-md);
+}
+
+.send-sim-picker .button {
+  min-width: 96px;
+}
+
 .field {
   display: grid;
   gap: var(--space-xs);
@@ -1592,4 +1616,4 @@ body.modal-open {
   .field-row--wide {
     grid-column: auto;
   }
-}
+}

public/assets/admin.js

@@ -50,6 +50,7 @@ const elements = {
   simStatus: document.querySelector('#simStatus'),
   simSlot0: document.querySelector('#simSlot0'),
   simSlot1: document.querySelector('#simSlot1'),
+  simSlotGrid: document.querySelector('.sim-slot-grid'),
   simSlot0State: document.querySelector('#simSlot0State'),
   simSlot1State: document.querySelector('#simSlot1State'),
   simSlot0Phone: document.querySelector('#simSlot0Phone'),
@@ -253,6 +254,11 @@ function renderSendSimLabel() {
   setText(elements.sendSimLabel, getActiveSimLabel());
 }
 
+function setSimSwitchStatus(message, type = '') {
+  setStatusMessage(elements.simStatus, message);
+  setStatusMessage(elements.smsStatus, message, type);
+}
+
 function getSimSlot(sim = {}, slotNumber) {
   return (sim.slots || []).find(slot => slot.slot === slotNumber) || {
     slot: slotNumber,
@@ -281,7 +287,18 @@ function renderSimSlot(slot, card, stateNode, phoneNode) {
   }
 
   card.classList.toggle('is-active', Boolean(slot.active));
-  setText(stateNode, slot.active ? '当前使用' : '未选中');
+  if (slot.active && slot.present === false) {
+    setText(stateNode, '当前未就绪');
+  } else if (slot.active) {
+    setText(stateNode, '当前使用');
+  } else if (slot.present === true) {
+    setText(stateNode, '可用');
+  } else if (slot.present === false) {
+    setText(stateNode, '未检测到SIM');
+  } else {
+    setText(stateNode, '未确认');
+  }
+
   const phoneText = formatSimSlotPhone(slot);
   if (phoneNode) {
     phoneNode.textContent = phoneText;
@@ -289,29 +306,81 @@ function renderSimSlot(slot, card, stateNode, phoneNode) {
   }
 }
 
+function getVisibleSimSlots(sim = {}, activeSlot = null) {
+  const slots = sim.slots || [];
+  const presentSlots = slots.filter(slot => slot.present === true);
+
+  if (presentSlots.length >= 2) {
+    return presentSlots;
+  }
+
+  if (activeSlot?.present === true) {
+    return [activeSlot];
+  }
+
+  return slots.filter(slot => slot.active || slot.present !== false);
+}
+
+function getSimModeLabel(sim = {}, activeSlot = null) {
+  const hardwareSwitchable = Boolean(sim.supported && sim.canSwitch);
+  if (!hardwareSwitchable) {
+    return '单卡/未检测到双卡';
+  }
+
+  const presentSlots = (sim.slots || []).filter(slot => slot.present === true);
+  if (presentSlots.length >= 2) {
+    return sim.modeLabel || '双卡';
+  }
+
+  if (activeSlot?.present === true) {
+    return `仅检测到 ${getSimDisplayLabel(activeSlot)}`;
+  }
+
+  return '未检测到可用SIM';
+}
+
 function renderSimStatus(sim = {}) {
   state.currentSim = sim;
 
   const supported = Boolean(sim.supported && sim.canSwitch);
   const activeSlot = getActiveSimSlot(sim);
-  const modeLabel = supported ? (sim.modeLabel || '双卡') : '单卡/未检测到双卡';
+  const modeLabel = getSimModeLabel(sim, activeSlot);
 
   setText(elements.simMode, modeLabel);
 
-  renderSimSlot(getSimSlot(sim, 0), elements.simSlot0, elements.simSlot0State, elements.simSlot0Phone);
+  const visibleSlots = getVisibleSimSlots(sim, activeSlot);
-  renderSimSlot(getSimSlot(sim, 1), elements.simSlot1, elements.simSlot1State, elements.simSlot1Phone);
+  const singleSlot = visibleSlots.length === 1;
+  const visibleSlotNumbers = new Set(visibleSlots.map(slot => slot.slot));
+
+  elements.simSlotGrid?.classList.toggle('is-single', singleSlot);
+
+  [
+    [getSimSlot(sim, 0), elements.simSlot0, elements.simSlot0State, elements.simSlot0Phone],
+    [getSimSlot(sim, 1), elements.simSlot1, elements.simSlot1State, elements.simSlot1Phone]
+  ].forEach(([slot, card, stateNode, phoneNode]) => {
+    if (card) {
+      card.hidden = !visibleSlotNumbers.has(slot.slot);
+      card.classList.toggle('is-single', singleSlot && visibleSlotNumbers.has(slot.slot));
+    }
+    renderSimSlot(slot, card, stateNode, phoneNode);
+  });
 
   elements.simSwitchButtons.forEach((button) => {
     const slot = Number.parseInt(button.dataset.simSwitch, 10);
+    const slotInfo = getSimSlot(sim, slot);
     const isActive = activeSlot?.slot === slot;
-    button.disabled = state.simBusy || Boolean(sim.switching) || !supported || isActive;
+    const unavailable = slotInfo.present === false;
-    button.textContent = isActive ? '正在使用' : `切到SIM${slot + 1}`;
+    button.hidden = singleSlot;
+    button.disabled = state.simBusy || Boolean(sim.switching) || !supported || isActive || unavailable;
+    button.textContent = isActive ? `SIM${slot + 1} 当前` : `切到SIM${slot + 1}`;
   });
 
   if (state.simBusy || sim.switching) {
-    setStatusMessage(elements.simStatus, '正在切换SIM...');
+    setSimSwitchStatus('正在切换SIM...');
-  } else if (supported && activeSlot) {
+  } else if (supported && activeSlot?.present === true) {
-    setStatusMessage(elements.simStatus, `当前 ${getSimDisplayLabel(activeSlot)}`, 'success');
+    setStatusMessage(elements.simStatus, `当前 ${getSimDisplayLabel(activeSlot)}`);
+  } else if (supported && activeSlot?.present === false) {
+    setStatusMessage(elements.simStatus, `${getSimDisplayLabel(activeSlot)} 未就绪，请检查是否插卡`);
   } else if (!supported) {
     setStatusMessage(elements.simStatus, '双卡不可用');
   } else {
@@ -803,10 +872,10 @@ async function switchSim(slot) {
       body: JSON.stringify({ slot: slotNumber })
     });
     renderSimStatus(result.data || {});
-    setStatusMessage(elements.simStatus, result.message || `已切换到SIM${slotNumber + 1}`, 'success');
+    setSimSwitchStatus(result.message || `已切换到SIM${slotNumber + 1}`, 'success');
     await refreshAll();
   } catch (err) {
-    setStatusMessage(elements.simStatus, err.message, 'error');
+    setSimSwitchStatus(err.message, 'error');
     await refreshSim().catch(() => {});
   } finally {
     state.simBusy = false;

src/modem.js

@@ -33,6 +33,7 @@ class ModemManager extends EventEmitter {
       switchSlot: null,
       bindSlot: null,
       switching: false,
+      probing: false,
       slots: this.createSimSlots(),
       lastCheckedAt: null,
       error: '',
@@ -63,6 +64,7 @@ class ModemManager extends EventEmitter {
       slot,
       name: `SIM${slot + 1}`,
       active: false,
+      present: null,
       phoneNumber,
       phoneLabel: phoneNumber || `SIM${slot + 1}`,
       lastCheckedAt: null
@@ -538,6 +540,25 @@ class ModemManager extends EventEmitter {
     }));
   }
 
+  updateSimSlotPresence(status, slotNumber, present) {
+    const slot = this.normalizeSimSlot(slotNumber);
+    if (slot === null) {
+      return;
+    }
+
+    status.slots = status.slots.map(item => {
+      if (item.slot !== slot) {
+        return item;
+      }
+
+      return {
+        ...item,
+        present: Boolean(present),
+        lastCheckedAt: new Date().toISOString()
+      };
+    });
+  }
+
   getBusinessSimSlot(status = this.sim) {
     return this.normalizeSimSlot(status.bindSlot) ?? this.normalizeSimSlot(status.switchSlot);
   }
@@ -637,14 +658,27 @@ class ModemManager extends EventEmitter {
       retryDelay = 2000,
       settleDelay = 3000,
       confirmTimeout = 15000,
-      confirmInterval = 1000
+      confirmInterval = 1000,
+      simReadyAttempts = 10,
+      simReadyDelay = 1000
     } = options;
 
     const currentSlot = await this.querySwitchSimSlot().catch(() => this.sim.switchSlot);
     this.sim.switchSlot = currentSlot;
 
     if (currentSlot === targetSlot) {
-      await this.waitSIMReady();
+      try {
+        await this.waitSIMReady({
+          attempts: simReadyAttempts,
+          delay: simReadyDelay,
+          label: `SIM${targetSlot + 1}`
+        });
+        this.updateSimSlotPresence(this.sim, targetSlot, true);
+      } catch (err) {
+        this.updateSimSlotPresence(this.sim, targetSlot, false);
+        throw err;
+      }
+
       return targetSlot;
     }
 
@@ -674,11 +708,155 @@ class ModemManager extends EventEmitter {
     this.sim.switchSlot = targetSlot;
     this.markActiveSimSlot(this.sim, this.getBusinessSimSlot(this.sim) ?? targetSlot);
     await this.sleep(settleDelay);
-    await this.waitSIMReady();
+
+    try {
+      await this.waitSIMReady({
+        attempts: simReadyAttempts,
+        delay: simReadyDelay,
+        label: `SIM${targetSlot + 1}`
+      });
+      this.updateSimSlotPresence(this.sim, targetSlot, true);
+    } catch (err) {
+      this.updateSimSlotPresence(this.sim, targetSlot, false);
+      await this.restoreSwitchSimSlot(currentSlot, `${context}失败后回退`).catch((restoreErr) => {
+        logger.warn(`${context}失败后回退SIM失败: ${restoreErr.message}`);
+      });
+      throw err;
+    }
 
     return targetSlot;
   }
 
+  async restoreSwitchSimSlot(slotNumber, context = 'SIM回退', timeout = 20000) {
+    const slot = this.normalizeSimSlot(slotNumber);
+    if (slot === null) {
+      return false;
+    }
+
+    logger.warn(`${context}: 恢复到SIM${slot + 1}`);
+    await this.sendATCommand(`AT+SWITCHSIM=${slot}`, 10000).catch((err) => {
+      logger.warn(`${context}命令失败: ${err.message}`);
+    });
+
+    const restored = await this.waitForSwitchSimSlot(slot, timeout, 1000);
+    if (restored) {
+      this.sim.switchSlot = slot;
+      this.markActiveSimSlot(this.sim, this.getBusinessSimSlot(this.sim) ?? slot);
+      return true;
+    }
+
+    logger.warn(`${context}: 未能确认恢复到SIM${slot + 1}`);
+    return false;
+  }
+
+  async restoreBindSimSlot(slotNumber, context = '业务SIM回退') {
+    const slot = this.normalizeSimSlot(slotNumber);
+    if (slot === null) {
+      return false;
+    }
+
+    await this.sendATWithRetry(`AT+BINDSIM=${slot}`, {
+      timeout: 5000,
+      retries: 1,
+      retryDelay: 500,
+      label: `${context}到SIM${slot + 1}`
+    }).catch((err) => {
+      logger.warn(`${context}到SIM${slot + 1}失败: ${err.message}`);
+    });
+
+    return true;
+  }
+
+  async restoreSimAfterProbe(switchSlot, bindSlot, context = 'SIM探测后恢复') {
+    const targetSwitchSlot = this.normalizeSimSlot(switchSlot);
+    const targetBindSlot = this.normalizeSimSlot(bindSlot) ?? targetSwitchSlot;
+
+    if (targetSwitchSlot !== null) {
+      await this.restoreSwitchSimSlot(targetSwitchSlot, context).catch((err) => {
+        logger.warn(`${context}切回SIM${targetSwitchSlot + 1}失败: ${err.message}`);
+      });
+    }
+
+    if (targetBindSlot !== null) {
+      await this.restoreBindSimSlot(targetBindSlot, context);
+    }
+  }
+
+  async probeInactiveSimSlot(status, slotNumber, originalSlot, originalBindSlot = originalSlot) {
+    const targetSlot = this.normalizeSimSlot(slotNumber);
+    const restoreSlot = this.normalizeSimSlot(originalSlot);
+    const restoreBindSlot = this.normalizeSimSlot(originalBindSlot) ?? restoreSlot;
+    if (targetSlot === null || restoreSlot === null || targetSlot === restoreSlot) {
+      return false;
+    }
+
+    logger.info(`探测SIM${targetSlot + 1}是否可用`);
+    let switched = false;
+
+    try {
+      const resp = await this.sendATCommand(`AT+SWITCHSIM=${targetSlot}`, 10000);
+      if (!resp.includes('OK')) {
+        logger.warn(`探测SIM${targetSlot + 1}切换返回非OK: ${this.formatATResponse(resp)}`);
+      }
+
+      switched = await this.waitForSwitchSimSlot(targetSlot, 15000, 1000);
+      if (!switched) {
+        this.updateSimSlotPresence(status, targetSlot, false);
+        return false;
+      }
+
+      await this.sleep(1000);
+      await this.waitSIMReady({
+        attempts: 5,
+        delay: 1000,
+        label: `SIM${targetSlot + 1}`
+      });
+      this.updateSimSlotPresence(status, targetSlot, true);
+      return true;
+    } catch (err) {
+      logger.warn(`探测SIM${targetSlot + 1}失败: ${err.message}`);
+      this.updateSimSlotPresence(status, targetSlot, false);
+      return false;
+    } finally {
+      if (switched) {
+        await this.restoreSimAfterProbe(restoreSlot, restoreBindSlot, `探测SIM${targetSlot + 1}后恢复`);
+      }
+    }
+  }
+
+  async probeSimSlotPresence(status, currentSlot) {
+    const originalSlot = this.normalizeSimSlot(currentSlot);
+    if (!status.supported || !status.canSwitch || originalSlot === null) {
+      return status;
+    }
+
+    if (this.sim.switching || this.sim.probing) {
+      return status;
+    }
+
+    const originalBindSlot = this.normalizeSimSlot(status.bindSlot) ?? originalSlot;
+
+    this.sim.probing = true;
+    try {
+      for (const slot of status.slots) {
+        if (slot.slot !== originalSlot) {
+          await this.probeInactiveSimSlot(status, slot.slot, originalSlot, originalBindSlot);
+        }
+      }
+
+      await this.restoreSimAfterProbe(originalSlot, originalBindSlot, 'SIM探测结束恢复');
+
+      const restoredSlot = await this.querySwitchSimSlot().catch(() => originalSlot);
+      status.switchSlot = this.normalizeSimSlot(restoredSlot) ?? originalSlot;
+      status.bindSlot = await this.queryBindSimSlot();
+      this.markActiveSimSlot(status, this.getBusinessSimSlot(status));
+      return status;
+    } finally {
+      this.sim.probing = false;
+      status.probing = false;
+    }
+  }
+
   async waitForSwitchSimSlot(targetSlot, timeout = 15000, interval = 1000) {
     const startedAt = Date.now();
 
@@ -806,12 +984,27 @@ class ModemManager extends EventEmitter {
     }
   }
 
+  isSimReadyResponse(resp) {
+    return String(resp || '').includes('+CPIN: READY');
+  }
+
+  async isCurrentSimReady(timeout = 2000) {
+    try {
+      const resp = await this.sendATCommand('AT+CPIN?', timeout);
+      return this.isSimReadyResponse(resp);
+    } catch (err) {
+      logger.debug(`查询当前SIM就绪状态失败: ${err.message}`);
+      return false;
+    }
+  }
+
   async getSimStatus(options = {}) {
     return await this.refreshSimStatus(options);
   }
 
   async refreshSimStatus(options = {}) {
     const refreshIdentity = options.refreshIdentity === true;
+    const probeSlots = options.probeSlots === true;
     const status = {
       ...this.sim,
       slots: this.sim.slots.map(slot => ({ ...slot })),
@@ -839,6 +1032,8 @@ class ModemManager extends EventEmitter {
       if (switchSlot !== null) {
         status.canSwitch = true;
         status.switchSlot = switchSlot;
+        const currentSimReady = await this.isCurrentSimReady();
+        this.updateSimSlotPresence(status, switchSlot, currentSimReady);
       } else {
         status.switchSlot = null;
         status.error = '未能读取当前AT SIM卡槽';
@@ -852,6 +1047,10 @@ class ModemManager extends EventEmitter {
         this.updateSimSlotPhoneNumber(status, switchSlot, phoneNumber);
       }
 
+      if (probeSlots && status.canSwitch && switchSlot !== null) {
+        await this.probeSimSlotPresence(status, switchSlot);
+      }
+
       status.lastCheckedAt = new Date().toISOString();
       this.sim = status;
       return this.getCachedSimStatus();
@@ -896,12 +1095,20 @@ class ModemManager extends EventEmitter {
         await this.switchSimForIdentityRead(targetSlot, {
           context: `切换SIM${targetSlot + 1}`,
           purpose: '用于业务绑定',
-          retries: 4,
+          retries: 2,
-          retryDelay: 3000,
+          retryDelay: 1000,
-          settleDelay: 3000
+          settleDelay: 1000,
+          confirmTimeout: 5000,
+          confirmInterval: 1000,
+          simReadyAttempts: 3,
+          simReadyDelay: 1000
         });
       } else {
-        await this.waitSIMReady();
+        await this.waitSIMReady({
+          attempts: 3,
+          delay: 1000,
+          label: `SIM${targetSlot + 1}`
+        });
       }
 
       if (this.normalizeSimSlot(before.bindSlot) !== targetSlot) {
@@ -1753,7 +1960,7 @@ class ModemManager extends EventEmitter {
 
     // 7. 按文档配置短信功能，并启用本项目需要的PDU模式
     await this.configureSMS();
-    await this.refreshSimStatus({ refreshIdentity: true });
+    await this.refreshSimStatus({ refreshIdentity: true, probeSlots: true });
 
     logger.info('模组初始化完成');
     this.emit('ready');
@@ -1762,24 +1969,29 @@ class ModemManager extends EventEmitter {
   /**
    * 等待SIM卡完成初始化
    */
-  async waitSIMReady() {
+  async waitSIMReady(options = {}) {
-    for (let attempt = 1; attempt <= 10; attempt++) {
+    const attempts = options.attempts ?? 10;
+    const delay = options.delay ?? 1000;
+    const timeout = options.timeout ?? 2000;
+    const label = options.label || 'SIM卡';
+
+    for (let attempt = 1; attempt <= attempts; attempt++) {
       try {
-        const resp = await this.sendATCommand('AT+CPIN?', 2000);
+        const resp = await this.sendATCommand('AT+CPIN?', timeout);
-        if (resp.includes('+CPIN: READY')) {
+        if (this.isSimReadyResponse(resp)) {
-          logger.info('✓ SIM卡已就绪');
+          logger.info(`✓ ${label}已就绪`);
           return;
         }
 
-        logger.warn(`SIM卡未就绪(${attempt}/10): ${this.formatATResponse(resp)}`);
+        logger.warn(`${label}未就绪(${attempt}/${attempts}): ${this.formatATResponse(resp)}`);
       } catch (err) {
-        logger.warn(`查询SIM卡状态失败(${attempt}/10): ${err.message}`);
+        logger.warn(`查询${label}状态失败(${attempt}/${attempts}): ${err.message}`);
       }
 
-      await this.sleep(1000);
+      await this.sleep(delay);
     }
 
-    throw new Error('SIM卡未就绪');
+    throw new Error(`${label}未就绪，可能未插卡或SIM初始化失败`);
   }
 
   /**